Offshore Structural Engineer - Abu Dhabi
Based in Abu Dhabi the Offshore Structural Engineer will be based in the Client Office and will involve offshore day visits as and when required. The incumbent must have at least 10 years overall engineering experience with at least 8 years' experience in design and analysis of Offshore structures. Extensive experience in all stages of Design Engineering (Conceptual/ FEED/ Detailed Engineering) of offshore platforms and structures is required. As a Senior Offshore Structural Engineer you must be knowledgeable and skilled in the use of structural analysis software and relevant international codes and standards and a holder of a Bachelor's Degree in Civil/ Structural Engineering.
If intereted in the position, please send your CV to abaillet@mphglobal.net
If intereted in the position, please send your CV to abaillet@mphglobal.net
Instrumentation Designer - Abu Dhabi
Contract type Temporary
Start date Immediate
Reporting lines and interactions:
• Functionally reports to: Head of Department – Instrumentation Control Systems
• Operationally reports to: Engineering Manager
Job scope (budget, management, specific criteria): dimensions of the job
Site surveys, index, cable block diagrams, instrument location layouts, cable routing, cable schedule, wiring diagrams, loop diagrams, hook-ups, MTO. Capable to deliver a full set of drawings as per schedules with high quality of auto-cross-checking, direct interface with Engineers.
Profile:
Must have:
Diploma in Instrumentation and/or Control Engineering
Main accountabilities:
Must have 6-9 years experience as an Instrumentation Designer in the Oil and Gas Industry in BROWNFIELD. Autonomous with 5 years practical experience as designer on Microstation and AutoCAD. Shall be able to prepare all the instrumentation deliverables independently with only general guidance from Engineers. Dynamism, pro-activeness, good communicating skills, team spirit.
If interested in the position, please send your CV to abaillet@mphglobal.net
Start date Immediate
Reporting lines and interactions:
• Functionally reports to: Head of Department – Instrumentation Control Systems
• Operationally reports to: Engineering Manager
Job scope (budget, management, specific criteria): dimensions of the job
Site surveys, index, cable block diagrams, instrument location layouts, cable routing, cable schedule, wiring diagrams, loop diagrams, hook-ups, MTO. Capable to deliver a full set of drawings as per schedules with high quality of auto-cross-checking, direct interface with Engineers.
Profile:
Must have:
Diploma in Instrumentation and/or Control Engineering
Main accountabilities:
Must have 6-9 years experience as an Instrumentation Designer in the Oil and Gas Industry in BROWNFIELD. Autonomous with 5 years practical experience as designer on Microstation and AutoCAD. Shall be able to prepare all the instrumentation deliverables independently with only general guidance from Engineers. Dynamism, pro-activeness, good communicating skills, team spirit.
If interested in the position, please send your CV to abaillet@mphglobal.net
Senior System Engineer - Abu Dhabi
Contract type
Permanent
Start date
Immediate
Directly supervises:
Key interactions (internally, externally):
Job scope (budget, management, specific criteria):
Main accountabilities :
Senior System Engineers shall provide technical support in the design, development and application of Systems in the Projects. The candidate shall identify requirements and develop functional and design specifications for networks and systems components for Projects. These Systems professionals provide the technical support and design of interfaces to ensure that the Systems integrates with the customer’s requirements. Senior System Engineer shall have experience in Systems Site Activities, Conceptual design of the System to be used. Developing programming standards, selecting and sizing instrument equipment, Designing low voltage electrical systems, Define the data structure layout and data flow model considering the volume and type of data involved in order to provide specifications for hardware selection and software development. In addition site support during construction and participation in Pre-Commissioning and Commissioning activities on site is required.
Additional information:
Educational Degrees and Certifications: Bachelor’s Degree in Engineering – Instrumentation
Minimum Time of Related Experience :
The engineers should have at least 10 to 15 years experience and be knowledgeable of DCS, ESD, F&E, SCADA and Compressor / Turbine Control Systems.
If interested in the position, please send your cv to abaillet@mphglobal.net
Permanent
Start date
Immediate
Directly supervises:
Key interactions (internally, externally):
Job scope (budget, management, specific criteria):
Main accountabilities :
Senior System Engineers shall provide technical support in the design, development and application of Systems in the Projects. The candidate shall identify requirements and develop functional and design specifications for networks and systems components for Projects. These Systems professionals provide the technical support and design of interfaces to ensure that the Systems integrates with the customer’s requirements. Senior System Engineer shall have experience in Systems Site Activities, Conceptual design of the System to be used. Developing programming standards, selecting and sizing instrument equipment, Designing low voltage electrical systems, Define the data structure layout and data flow model considering the volume and type of data involved in order to provide specifications for hardware selection and software development. In addition site support during construction and participation in Pre-Commissioning and Commissioning activities on site is required.
Additional information:
Educational Degrees and Certifications: Bachelor’s Degree in Engineering – Instrumentation
Minimum Time of Related Experience :
The engineers should have at least 10 to 15 years experience and be knowledgeable of DCS, ESD, F&E, SCADA and Compressor / Turbine Control Systems.
If interested in the position, please send your cv to abaillet@mphglobal.net
Process Engineer - Abu dhabi
Process Engineer
Region UAE
Location Abu Dhabi
Contract type Permanent
Start date Immediate
Delivery and coordination of technically complex process engineering design within proposals, studies, projects execution & operations, as part of a study &/or project team, in accordance with design & engineering standards & procedures, schedules and budget, with a continuous concern for quality standards, targets and customer satisfaction.
Reporting lines and interactions:
Hierarchically reports to: Process & Technology Manager, possibly Technology Dept/Line Manager.
Operationally reports to: Process Manager.
Directly supervises (operationally): Possibly Process Engineer.
Key interactions (internally, externally): Project Engineer, PID’s Designer, Lead PID’s, Process Specialist Engineer, Discipline Engineer, possibly client.
Job scope (budget, management, specific criteria):
-Activities dedicated to one specific project.
Profile:
Must have:
-University chemical engineering degree with 8-10 years as process engineer.
-Theoretical knowledge of process design methods & tools.
Main accountabilities
Analyses project specifications, tender and proposals requirements.
Contribute to the development of design parameters and methodologies.
Prepares technically correct, safe, environmentally friendly, cost & time effective discipline engineering analysis and solutions for approval :
Design basis
Process description
PFD’s and heat & material balance
MSD and material selection philosophy
Control scheme
Process and Utility P&ID’s
Equipment & instrumentation Datasheet
Utilities and chemicals consumption summaries
Simulations and calculations
(…)
Provides support to all project activities, from engineering to start-up, as required.
Interfaces with other process engineering disciplines and design team(s).
Assists in development of a process knowledge databasis for studies, projects &/or operations (capturing and reporting events & experiences within studies, projects & operations and writing of technical notes).
May participate in pre-commissioning, commissioning, and start-up.
Reports own activities within studies, projects &/or operations management.
Guarantees the compliance of process engineering solutions with client requirements, industry standards and Group HSE, engineering processes and best practices.
Coordinates process activities on tenders and project execution.
Provides less experienced process engineers with guidance and training and check their deliverables.
Additional information:
-Individual Contributor.
-High level of technical knowledge.
-Has to deal with challenging environments and technical requirements.
-Still accountable for his/her own production of process solutions but he/she may also coordinate process activities in a restricted area.
-Ensures compliance of proposed solutions with standards & client requirements.
-Check the deliverables of less experiences engineers.
If interested in the position, please send your Cv to abaillet@mphglobal.net
Region UAE
Location Abu Dhabi
Contract type Permanent
Start date Immediate
Delivery and coordination of technically complex process engineering design within proposals, studies, projects execution & operations, as part of a study &/or project team, in accordance with design & engineering standards & procedures, schedules and budget, with a continuous concern for quality standards, targets and customer satisfaction.
Reporting lines and interactions:
Hierarchically reports to: Process & Technology Manager, possibly Technology Dept/Line Manager.
Operationally reports to: Process Manager.
Directly supervises (operationally): Possibly Process Engineer.
Key interactions (internally, externally): Project Engineer, PID’s Designer, Lead PID’s, Process Specialist Engineer, Discipline Engineer, possibly client.
Job scope (budget, management, specific criteria):
-Activities dedicated to one specific project.
Profile:
Must have:
-University chemical engineering degree with 8-10 years as process engineer.
-Theoretical knowledge of process design methods & tools.
Main accountabilities
Analyses project specifications, tender and proposals requirements.
Contribute to the development of design parameters and methodologies.
Prepares technically correct, safe, environmentally friendly, cost & time effective discipline engineering analysis and solutions for approval :
Design basis
Process description
PFD’s and heat & material balance
MSD and material selection philosophy
Control scheme
Process and Utility P&ID’s
Equipment & instrumentation Datasheet
Utilities and chemicals consumption summaries
Simulations and calculations
(…)
Provides support to all project activities, from engineering to start-up, as required.
Interfaces with other process engineering disciplines and design team(s).
Assists in development of a process knowledge databasis for studies, projects &/or operations (capturing and reporting events & experiences within studies, projects & operations and writing of technical notes).
May participate in pre-commissioning, commissioning, and start-up.
Reports own activities within studies, projects &/or operations management.
Guarantees the compliance of process engineering solutions with client requirements, industry standards and Group HSE, engineering processes and best practices.
Coordinates process activities on tenders and project execution.
Provides less experienced process engineers with guidance and training and check their deliverables.
Additional information:
-Individual Contributor.
-High level of technical knowledge.
-Has to deal with challenging environments and technical requirements.
-Still accountable for his/her own production of process solutions but he/she may also coordinate process activities in a restricted area.
-Ensures compliance of proposed solutions with standards & client requirements.
-Check the deliverables of less experiences engineers.
If interested in the position, please send your Cv to abaillet@mphglobal.net
Senior and Principal Piping Designers
We are seeking Senior and Principal Piping designers for contracts with well established international companies based in Aberdeen. All contracts are long term, if you are interested please email your CV to mbird@roevin.co.uk. EU/UK work visa is mandatory.
Senior Piping Engineer - Aberdeen - Global Client
Looking for a Senior Piping Engineer to be based in Aberdeen. Very exciting position, send me your CV or call for more information on this job........ you will be rewarded with an excellent contract rate due to the nature of the work on this role. k.maxwell@eurosearch.net or call 01224 228192
Senior Pipe Supporter - Aberdeen
Currently recruiting in Aberdeen for Senior Pipe Supporter. Competent in PDMS, Draft and MDS and to have experience in Brownfield Pipe Supports. CV's Urgently to k.maxwell@eurosearch.net
Senior Piping Designer - Aberdeen
Im currently recruiting for Senior+ level Piping Designers in Aberdeen. This is an excellent opportunity to join a well established team. AutoCAD, Microstation, PDMS, Smartplant....Various different projects recruiting.... CV urgently to me k.maxwell@eurosearch.net EU Applicants Only Please
Principal Piping Engineer - Aberdeen
I am currently recruiting for Principal Piping Engineers to be based in Aberdeen, I have several clients who are looking for this level and can start you on an immediate basis. My clients are offering fantastic contract rates which are above the market average. Please get in touch and send your CV today, these are urgent roles. I do require you to have the right to work in the UK, Many Thanks
0 comments:
Post a Comment